Popular Articles
How do I replace the blades for my meat cutter?
We have an easy-to-follow tutorial video that details this process step by step: Please make sure to wear protective gloves rated to handle blades and knives while handling the meat cutter! Need replacement blades? Place an order with us by phone ...
The meat is not coming out of my tenderizer. What should I do?
The most probable cause of the meat getting stuck in your tenderizer is that the combs are not installed correctly. Please make sure that the teeth end of the combs are resting on the inside and between the two blade assemblies and not on the outside ...
How do I clean my meat cutter?
Please make sure that the machine is unplugged, and the meat cutter attachment is removed off the motor unit. Once you take off the outer casing of the attachment, we recommend manually washing the attachment shaft assemblies, using warm soapy water ...
The grinder stops working suddenly during operation. What should I do?
There are a number of reasons that might have caused this to occur. The machine has been overloaded. Turn the forward/reverse switch to OFF. Let the unit cool off for 10-15 minutes before starting again. Press the Reset button, then resume. If after ...
There is grease coming out from a small pinhole at the top of my motor (AE-G12NM/AE-G22NM). What should I do?
All of our meat grinder motor transmissions are packed full with food-safe lithium grease during manufacturing. On occasion, the transmission ends up packed with more grease than necessary to ensure the machine will operate effectively and extend its ...